2 square cards I used anita's.
3 pieces of paper.
2 images.
sentiments and embellishments.
Scalloped square dies.
Scalloped square dies.
Masking tape.
Foam pads.
Die cutting machine.
1. Fold one card into a basic square card and the other into a gate fold.
2. Cover the inside of both cards.
3. Cover the front of the basic card.
4. Take the basic card open it flat and place the 2 largest dies onto the front of the card and pass threw your machine.
5. You now have a frame and a mat in paper and card stick the paper to the card.
6 . Stick one of the images into the aperture you have just created.
7. Finish off with sentiments and embellishments.
8. Take the gate fold card and close stick with masking tape the smaller of the 2 dies to the left of the fold.
9. Open the card out flat and pass threw your machine.
10. Close the card again and stick onto the right hand side. Now you can remove the tape fron=m the left.
11. Open flat and pass threw your machine.
12. Stick the frame to theleft front of your card using pads. Cut the frame and stick to the right hand side.
13. Finish off with sentiments and embellishments.
No comments:
Post a Comment
Thank you for your kind comments Di